10mm adapter kit with caliber adapter ring, short safety pipe, black extension, and red safety nut

Cutaway pistol diagram showing the laser cartridge and barrel safety-pipe system installed

Black safety-pipe extension shown beside two safety pipes for reference

Short silver safety pipe for a Smart SureStrike™ laser cartridge

10mm caliber adapter ring for a Smart SureStrike™ 9mm laser cartridge

Orange safety nut for the barrel safety-pipe system

10mm Adapter Kit for Smart SureStrike™ Laser Cartridge

$39.95

Adapt your compatible 9mm Smart SureStrike™ laser cartridge for 10mm training with an adapter ring, short safety pipe, black extension, and safety nut. Useful for earlier Smart systems purchased before January 1, 2026 that did not include a safety-pipe kit. Smart DryFireMag and laser cartridge sold separately.

Adapts your compatible 9mm Smart laser cartridge for 10mm use
Includes adapter ring, short safety pipe, extension, and nut
Supplies safety-pipe components omitted from pre-2026 Smart systems
Simple threaded assembly—no tools required

Description

10mm Adapter Ring & Safety-Pipe Kit

Adapt your compatible 9mm Smart SureStrike™ Red or Infrared Laser Cartridge for 10mm laser training. This kit combines a 10mm caliber adapter ring with a short barrel safety pipe, black extension, and safety nut. The laser cartridge and Smart DryFireMag® are sold separately.

BOUGHT YOUR SMART SYSTEM BEFORE JANUARY 1, 2026? Barrel safety-pipe kits were not included with Smart DryFireMag Laser Training Systems purchased before January 1, 2026. If you own an earlier system and do not already have the required safety-pipe components, this adapter kit can supply those components along with the 10mm adapter ring.

BOUGHT YOUR SMART SYSTEM ON OR AFTER JANUARY 1, 2026? Barrel safety-pipe kits are included with current Smart DryFireMag Laser Training Systems. The current GLOCK 10mm/.45 Auto Red and Infrared systems also include a 10mm adapter ring. Check what you already own before ordering duplicate components.

Do You Need the Kit or Just the Ring?

Choose this adapter kit if you need both the 10mm ring and barrel safety-pipe components, or want a spare set.
Choose the ring only if you already have the correct safety pipe, extension, and nut for your compatible 10mm pistol.
Adding a different pistol? You must also have the Smart DryFireMag model compatible with that pistol. An adapter kit alone does not make a 9mm training magazine fit a 10mm pistol.

Compatibility & Required Components

For compatible GLOCK® 10mm configurations, including G20, G29, G40, and corresponding MOS configurations, use this kit with the Smart DryFireMag for GLOCK 10mm/.45 Auto and a compatible Smart SureStrike™ 9mm Red or Infrared Laser Cartridge. Review the model-specific compatibility information before ordering.

The adapter changes the laser cartridge’s caliber fit; it does not change which pistols your Smart DryFireMag fits. Confirm compatibility for your firearm and complete system before ordering. Standard DryFireMags do not activate Smart SureStrike laser cartridges.

Long-barrel configurations: The GLOCK 10mm/.45 Auto Smart system instructions require additional safety-pipe length for barrels 5 inches or longer, including the G40. For those configurations, use the Long Safety Pipe with the black extension, or the short safety pipe with two black extensions.

Short safety pipe length: 2-7/8 inches (2.875 inches). The included black extension adds pipe length when required; it does not replace the need for a longer configuration on certain barrels.

SKU: 10SSADK

Smart SureStrike™ Adapter Kit Installation

BEFORE INSTALLATION: Verify that the firearm is unloaded. Physically and visually inspect the chamber, bore, and magazine well, and remove all live ammunition from the training area. Assemble the laser cartridge and adapter outside the firearm.

USE THE CORRECT BACK CAP: Retain the compatible Smart SureStrike™ 9mm Optic Back Cap for Smart DryFireMag laser activation. A standard firing-pin-activated back cap will not provide Smart DryFireMag laser activation.

Unscrew the 9mm Optic Back Cap from the Smart SureStrike laser module. Remove the battery pack if installed.
Position the 10mm adapter ring over the laser module with its threaded end facing the back-cap end. Installing the adapter upside down can damage the threads.
Carefully engage the adapter’s threads and turn it down until seated. Do not force or overtighten the adapter.
Insert the battery pack with its positive (+) end facing the back cap. Leave the protective shrink wrap intact.
Thread the compatible 9mm Optic Back Cap back onto the laser module to secure the adapter ring.
Confirm that the assembly is fully closed with no gap. If the components do not thread together properly, stop and check their orientation.
Install the assembled cartridge and the required barrel safety pipe and nut according to your Smart DryFireMag system instructions. Use the safety-pipe length and extensions appropriate for your barrel.

Disassembly: Remove the cartridge from the firearm according to your Smart DryFireMag system instructions, then reverse the adapter assembly steps above. Remove the laser-cartridge battery pack before storage.

Downloads & Product Instructions

The Laser Ammo data sheet provides an overview of its caliber-adapter range. For Smart DryFireMag use, confirm compatibility with your specific magazine, laser cartridge, firearm, and safety-pipe configuration.

Caliber Adapter Overview (PDF) Safety Pipe Instructions (PDF) Get Compatibility Help

Laser Ammo Product Video

Follow the instructions for your specific Smart DryFireMag system when installing components.

Related Components & Ring-Only Option

SAFETY FIRST: Always verify that your firearm is unloaded, remove all live ammunition from the training area, and follow the product instructions. Correctly install the required barrel safety-pipe components before training.

What's Included