Standard DryFireMag
- Product type
- Standard training magazine
- Laser feedback
- None
- Best for
- Repeated trigger practice without laser feedback
- Required separately
- Nothing for compatible models
Combine repeated trigger-reset practice with invisible IR laser feedback in compatible SIG SAUER® P320-family pistols—without racking the slide between presses.
Spacer required: Always install the appropriate included black spacer for consistent performance and safe insertion.
15-round Compact P320 models: Use the included tall spacer.
17-round Full-Size models: Use the included short spacer.
| CALIBER | COMPATIBLE SIG SAUER MODELS | REQUIRED ADAPTER |
|---|---|---|
| 9MM | P320, P320C/P320 Compact/C320, P320 Carry, P320 Full Size/P320F, P320 MAX, P320RX, P320RXP, P320X Series, P320 X5 Legion, P320WCG, M17, M18 and Flux Raider. | No caliber adapter required. Review the barrel-length requirements below. |
| .40 S&W | Compatible P320-family pistols chambered in .40 S&W. | .40 S&W adapter required for laser use |
| .357 SIG | Compatible P320-family pistols chambered in .357 SIG. | .357 SIG adapter required for laser use |
| NOT COMPATIBLE | ||
| P320 XCarry configurations; P320 AXG models, including AXG Pro and AXG Legion; California-compliant P320 models; and P320 pistols chambered in 10mm or .45 ACP. | ||
The system includes one short safety pipe and one black safety-pipe extension. Compatible P320 pistols with barrels 5 inches or longer, including the P320 MAX, require additional pipe length.
Recommended configuration: Use the Long Safety Pipe with the included black extension. The Long Safety Pipe works by itself with barrels up to approximately 4.8 inches and works better with the included extension for barrels 5 inches or longer.
Alternative configuration: Use the included short safety pipe and included black extension with one additional black safety-pipe extension.
Recommended for barrels 5 inches or longer when combined with the included black extension.
Alternative for using the included short safety pipe with two black extensions.
The Smart DryFireMag® for SIG SAUER® P320 IR Laser Training System combines repeated trigger-reset simulation with invisible infrared laser feedback. Practice trigger control, presentation from the holster and other dry-fire drills with your compatible SIG SAUER P320-family pistol—without manually cycling the slide between trigger presses.
The Smart SureStrike™ Infrared 9mm Laser Cartridge emits an invisible IR signal that must be detected by a compatible electronic target or simulator. It does not provide visible feedback on paper, physical or other non-electronic targets.
Because the laser is invisible, IR training encourages you to use your firearm’s sights or optic instead of watching a visible laser dot or shooting from the hip.
When properly installed and adjusted, the rechargeable Smart DryFireMag detects the simulated trigger press and wirelessly activates the Smart SureStrike Laser Cartridge. This provides infrared laser shot feedback without requiring the firearm’s firing pin to strike the cartridge.
Because the infrared signal is not visible to the shooter, it cannot be used as a visible aiming reference. This encourages you to establish your sight picture through the firearm’s sights or optic while a compatible electronic target or simulator detects the infrared signal.
Choose the training environment that fits your available space and drills:
This is a complete Smart DryFireMag Laser Training System—not a Mag Only product. It includes the rechargeable Smart DryFireMag, proprietary Infrared 9mm Laser Cartridge, safety-pipe components and other accessories needed for compatible IR training.
A compatible electronic target or simulator is required and sold separately. The included Smart SureStrike Infrared 9mm Laser Cartridge is designed specifically for use with the Smart DryFireMag. This system is not compatible with firing pin-activated or other laser cartridges.
A black magazine spacer is required for consistent performance and safe insertion of the Smart DryFireMag. Two spacers are included with the system:
Follow the included product instructions to select and install the correct spacer before inserting the Smart DryFireMag.
The Smart DryFireMag contains an internal rechargeable lithium battery and includes a USB-C charging cable. Allow approximately 2.25 hours for a full charge, which can provide up to approximately 50,000 trigger presses or laser pulses. Actual battery life can vary with use and storage conditions.
The Smart SureStrike™ Laser Cartridge uses replaceable, non-rechargeable battery packs designed to provide thousands of laser pulses. Two laser-cartridge battery packs are included. Keep the protective shrink wrap on each battery pack during use, and remove the battery pack from the laser cartridge after every training session to reduce battery drain and extend its storage life.
The P320 Smart DryFireMag works with your pistol’s existing trigger system instead of producing one fixed pull weight. The simulated trigger pull may measure approximately ½ pound heavier than the firearm’s dry-fire trigger pull, but results can vary based on the individual firearm, trigger configuration, installed spring, spacer fit and measurement method.
Trigger weight and feel can be subjective. An accessory spring is included to provide another setup option. For additional adjustment, the optional SIG SAUER P320 Spring Kit provides approximate simulated pull weights ranging from 6¾ to 9 pounds, as shown on the included spring-reference card.
Add the optional P320 Spring Kit for additional simulated trigger-weight options from approximately 6¾ to 9 pounds. The kit includes color-coded springs and a wallet-size reference card.
The orange baseplate helps distinguish the Smart DryFireMag from live-fire magazines during dry-fire practice. The included magazine spacers are black. Always verify that your firearm is unloaded and follow the included instructions before beginning any dry-fire training session.
Watch our Red vs. IR comparison to understand the differences in laser visibility, target requirements and training applications before choosing your system.
SKU: S-P9-IR
Made in the USA
For patent information, visit the DryFireMag Patents page.
We proudly ship to all 50 United States, Guam, Puerto Rico, the U.S. Virgin Islands, and Armed Forces addresses (APO/FPO/DPO).
Questions about your order status or shipment? Reach out to our team via our shipping page contact form or call 208-702-7030.
Our refund and return policy lasts 30 days. If 30 days have passed since your purchase, we can’t offer you a full refund or exchange.
To be eligible for a return, your item must be in like new condition and the same condition you received it. It must also be in the original packaging.
To complete your return, we require a receipt or proof of purchase.
There are certain situations where only partial refunds are granted:
When your returned item has been received and inspected, and your return is approved, your refund will be processed, and a credit will be applied to your credit card or original method of payment.
If you haven’t received a refund yet, first recheck your bank account.
Then contact your credit card company; it may take some time before your refund is officially posted.
Next, contact your bank. There is often some processing time before a refund is posted.
If you’ve done all of this and you still have not received your refund, please complete the form below or call 208-702-7030.
To return your product, please request a shipping label using our return form below or call us at 208-702-7030.
For general questions related to refunds and returns please contact us through the form on our Returns page or call us at 208-702-7030.
Every option provides repeated trigger-reset simulation without racking the slide. Compare the product type, feedback and additional equipment below.
