Standard DryFireMag
- Product type
- Standard training magazine
- Laser feedback
- None
- Best for
- Repeated trigger practice without laser feedback
- Required separately
- Nothing for compatible models
Combine repeated trigger-reset simulation with invisible infrared laser feedback in compatible GLOCK 10mm and .45 ACP pistols. Both caliber adapters and the barrel safety-pipe components are included.
COMPATIBLE ELECTRONIC TARGET OR SIMULATOR REQUIRED: The invisible infrared laser must be used with a compatible electronic target or simulator capable of detecting its signal. It does not provide visible feedback on paper, physical or other non-electronic targets.
SMART LASER COMPATIBILITY: This system works only with the included Smart SureStrike™ Infrared 9mm Laser Cartridge. It is not compatible with firing pin-activated or other third-party laser cartridges.
10mm pistols: Use the included 10mm laser-cartridge adapter ring.
.45 ACP pistols: Use the included .45 ACP laser-cartridge adapter ring.
| Caliber | Compatible GLOCK models | Required configuration |
|---|---|---|
| 10MM | G20, G29, G40 and corresponding MOS configurations. | Included 10mm adapter ring. Review the barrel-length requirements below. |
| .45 ACP | G21, G30, G41 and corresponding MOS configurations. G21SF configurations without the ambidextrous magazine release are compatible. | Included .45 ACP adapter ring. Review the barrel-length requirements below. |
| NOT COMPATIBLE | ||
| GLOCK .45 G.A.P. pistols and G21SF pistols equipped with the older ambidextrous magazine release. | ||
Pistols with barrels 5 inches or longer: Additional safety-pipe length is required. This includes the G40, G41 and any compatible long-slide G20 or G21 configuration.
The Smart DryFireMag® for GLOCK® 10mm/45 Auto IR Laser Training System combines repeated trigger-reset simulation with invisible infrared laser feedback. Practice trigger control, presentation from the holster and other dry-fire drills with your compatible GLOCK 10mm or .45 Auto pistol—without manually cycling the slide between trigger presses.
The Smart SureStrike™ Infrared 9mm Laser Cartridge emits an invisible IR signal that must be detected by a compatible electronic target or simulator. It does not provide visible feedback on paper, physical or other non-electronic targets.
Because the laser is invisible, IR training encourages you to use your firearm’s sights or optic instead of watching a visible laser dot or shooting from the hip.
When properly installed and adjusted, the rechargeable Smart DryFireMag detects the simulated trigger press and wirelessly activates the Smart SureStrike Laser Cartridge. This provides infrared laser shot feedback without requiring the firearm’s firing pin to strike the cartridge.
Because the infrared signal is not visible to the shooter, it cannot be used as a visible aiming reference. This encourages you to establish your sight picture through the firearm’s sights or optic while a compatible electronic target or simulator detects the infrared signal.
Compatible training options include the LaserPET II™, I-MTTS electronic targets and compatible Smokeless Range® simulator configurations.
This is a complete Smart DryFireMag Laser Training System—not a Mag Only product. It includes the rechargeable Smart DryFireMag, proprietary Infrared 9mm Laser Cartridge, safety-pipe components and other accessories needed for compatible IR training.
A compatible electronic target or simulator is required and sold separately. The included Smart SureStrike Infrared 9mm Laser Cartridge is designed specifically for use with the Smart DryFireMag. This system is not compatible with firing pin-activated or other laser cartridges.
The included Smart SureStrike Infrared Laser Cartridge is a 9mm cartridge. Use the appropriate included adapter ring for your pistol:
Follow the included product instructions when selecting and installing the appropriate adapter ring and barrel safety-pipe components.
The included short safety pipe and one black safety-pipe extension accommodate many compatible configurations. Pistols with barrels measuring 5 inches or longer—including the G40, G41 and any compatible long-slide G20 or G21 configuration—require additional safety-pipe length.
For barrels 5 inches or longer, we recommend using the Long Safety Pipe with the black safety-pipe extension already included with this system. Alternatively, use the included short safety pipe and black extension with one additional black safety-pipe extension.
The Smart DryFireMag contains an internal rechargeable lithium battery and includes a USB-C charging cable. Allow approximately 2.25 hours for a full charge, which can provide up to approximately 50,000 trigger presses or laser pulses. Actual battery life can vary with use and storage conditions.
The Smart SureStrike™ Laser Cartridge uses replaceable, non-rechargeable battery packs designed to provide thousands of laser pulses. Two laser-cartridge battery packs are included. Keep the protective shrink wrap on each battery pack during use, and remove the battery pack from the laser cartridge after every training session to reduce battery drain and extend its storage life.
The Smart DryFireMag ships with a pull weight that closely approximates the firearm’s actual trigger pull weight. Trigger configurations, installed components and individual firearms can vary, so the simulated trigger pull might not feel identical to the live-fire trigger pull of every pistol.
One lighter accessory spring is included. For additional adjustment, the optional GLOCK Spring Kit provides multiple spring options ranging from approximately 3 pounds to greater than 10 pounds.
Add the GLOCK Spring Kit for additional trigger-pull adjustment options.
The orange baseplate helps distinguish the Smart DryFireMag from live-fire magazines during dry-fire practice.
Always verify that your firearm is unloaded and follow the included product instructions before beginning any dry-fire training session.
Watch our Red versus IR comparison to understand the differences in laser visibility, target requirements and training applications before choosing your system.
Choose IR for sight- and optic-focused training: The invisible infrared laser requires a compatible electronic target or simulator. Because you cannot see the laser, you must use your sights or optic instead of watching the laser dot.
Choose Red for visible feedback: The visible red laser works with paper, physical and reflective targets without requiring an electronic target. It can also be used with compatible electronic targets and simulators.
EXPLORE THE GLOCK 10MM/45 AUTO RED SYSTEM
SKU: S-G10-IR
Made in the USA
For patent information, visit the DryFireMag Patents page.
We proudly ship to all 50 United States, Guam, Puerto Rico, the U.S. Virgin Islands, and Armed Forces addresses (APO/FPO/DPO).
Questions about your order status or shipment? Reach out to our team via our shipping page contact form or call 208-702-7030.
Our refund and return policy lasts 30 days. If 30 days have passed since your purchase, we can’t offer you a full refund or exchange.
To be eligible for a return, your item must be in like new condition and the same condition you received it. It must also be in the original packaging.
To complete your return, we require a receipt or proof of purchase.
There are certain situations where only partial refunds are granted:
When your returned item has been received and inspected, and your return is approved, your refund will be processed, and a credit will be applied to your credit card or original method of payment.
If you haven’t received a refund yet, first recheck your bank account.
Then contact your credit card company; it may take some time before your refund is officially posted.
Next, contact your bank. There is often some processing time before a refund is posted.
If you’ve done all of this and you still have not received your refund, please complete the form below or call 208-702-7030.
To return your product, please request a shipping label using our return form below or call us at 208-702-7030.
For general questions related to refunds and returns please contact us through the form on our Returns page or call us at 208-702-7030.
Every option provides repeated trigger-reset simulation without racking the slide. Compare the product type, feedback and additional equipment below.
